StoreEver Tape Storage
1748252 Members
3953 Online
108760 Solutions
New Discussion

Re: Can't LTO drives from rp7400

 
Raul_7
Occasional Advisor

Re: Can't LTO drives from rp7400

To all

Problem has been resolved. It looks like there is 1 default zone all brocade switches. Port "0" was not part of the default zone. HP CE configured Port "0" to be part of the default zone. It works fine.
Good things come to those who wait, "let the backups finish"
Vincent Fleming
Honored Contributor

Re: Can't LTO drives from rp7400

Raul,

Thanks for posting the resolution! It's always helpful to see what works for debugging different problems.

For everyone else - there's some great advice in this article - if you haven't read the whole thread, you should - there are some great tricks in there!

No matter where you go, there you are.