Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Change drive of autoloader ?

Dufour01
Occasional Contributor

Change drive of autoloader ?

Hello,

 

We have an autoloader 1x8 G2 AUTOLDR, serial : MXA92110EB

with a drive Ultrium 3-SCSI   serial HU10823P4U

 

We have lot of problem with the drive (a more problem now, when we have replaced all the cardrige)

 

The drive had problem to write/read to the medias. We have tried some clening (with new cardrige).

But always problem.

 

so we are looking to change the drive. (no problem with autoloader itself)

 

Is it possible to do that ?

We have checked on our supplier to buy the same drive, but same to not exist any more.

So is it possible to change the drive with a new, and more recent, like LTO5-6 ?

Is it possible to replace with a model on SAS in place of scsi ?

 

Can you give model number to buy ?

 

Thx.

 

 

 

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Change drive of autoloader ?

An LTO-5 drive can read LTO-3 and write LTO-4; the drive can be FC, SAS or SCSI (depending on model and generation.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
David_Schwartzs
Honored Contributor

Re: Change drive of autoloader ?

Unfortunately, HP doesn't officially support upgrading the drive in the 1/8 Autoloader, and certainly not changing from SCSI to SAS or FC connectivity.

 

You may want to consider replacing the Autoloader with a MSL2024 - the MSL2024 tape library holds 3x the tapes, and also is designed for future upgradability.

Regards,
--
David Schwartzstein
IT Channel Sales Expert / Solutions Architect

Currently looking for my next opportunity - http://www.linkedin.com/in/pctechyoda

If my post solves your problem, please kindly take a moment to mark my post as a solution. Thank you.