CommandView-TL

[Suzi Fischman]

I am running CommandView-TL ver2.0.00 build 176. I setup a Host incorrectly under Host Access(Secure Manager). I am having a problem adding it correctly. I get an error saying that the name is already in use. Is there a way to purge the bad entry? I did a remove but it doesn't seem to really remove it.

[Torsten. · Accepted solution]

It may be important to mention your library model.

From the release notes of the current version of commandview tl:

"Edit Host/HBA Access dialog
The Edit Host/HBA Access dialog was not removing the selected hosts when the remove action was initiated. This usually occurred when the host table in the dialog was sorted (by clicking on the column headers). "

Current version is 2.3, see

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=438305&swItem=co-56783-1&prodNameId=441994&swEnvOID=228&swLang=13&taskId=135&mode=4&idx=0

[Suzi Fischman]

Sorry it is an ESL712e LTO3 drives. It looks like I need to upgrade to 2.3. Thanks for your resonse.