Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

CommandView-TL

SOLVED
Go to solution
Suzi Fischman
Frequent Advisor

CommandView-TL

I am running CommandView-TL ver2.0.00 build 176. I setup a Host incorrectly under Host Access(Secure Manager). I am having a problem adding it correctly. I get an error saying that the name is already in use. Is there a way to purge the bad entry? I did a remove but it doesn't seem to really remove it.
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: CommandView-TL

It may be important to mention your library model.

From the release notes of the current version of commandview tl:

"Edit Host/HBA Access dialog
The Edit Host/HBA Access dialog was not removing the selected hosts when the remove action was initiated. This usually occurred when the host table in the dialog was sorted (by clicking on the column headers). "

Current version is 2.3, see

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=438305&swItem=co-56783-1&prodNameId=441994&swEnvOID=228&swLang=13&taskId=135&mode=4&idx=0

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Suzi Fischman
Frequent Advisor

Re: CommandView-TL

Sorry it is an ESL712e LTO3 drives. It looks like I need to upgrade to 2.3. Thanks for your resonse.