Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring Storagetek 9738

Kennedy_1
Occasional Contributor

Configuring Storagetek 9738

I ve got a STK 9738 (new-unused for 3 yrs) and need to configure with a HPUX 11i server to run 'Networker' for some backups. THe libray is working fine by itself. When connected to the server , it is not detected by the server. ioscan does not report that the device is present as is inquire. Can someone provide me some info. based on your experiences on what to do next if the SCSI device is not detected.
- checked the cable (STK Engineer)
- changed the SCSI ID

Thanks
KK
1 REPLY
Torsten.
Acclaimed Contributor

Re: Configuring Storagetek 9738

Do you see the box as UNCLAIMED?

You probably need to include the schgr driver.

Please provide an "ioscan -fn".

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!