Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Connect a HP SAS rack mount to a DL160 G6

Manuel Dalla Lana
Occasional Visitor

Connect a HP SAS rack mount to a DL160 G6

Hello,
I've bought a DL160 G6 and I want to connect a HP 1U SAS rack mount kit (AE459A) to it.
on this link ( https://www11.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c01762056 ) under the tape drive section, it is said that a HP Smart Array P212 (462828-B21) (which I've also bought) is recommended to connect the two, but no cable in both the packages is useful to connect the two units (server and SAS rack mount) because the AE459A has the same port as the 462828-B21.

Which cable is needed for the connection between the two?

Thank you in advance.
1 REPLY
ANNIE
Trusted Contributor

Re: Connect a HP SAS rack mount to a DL160 G6

Hi Manuel,
Check out this link,
http://h18000.www1.hp.com/products/quickspecs/13247_na/13247_na.PDF
Thanks.
----------------------------------------------------------------------------------------------------------------------------------
** If found useful, please assign kudos located at the left hand side.
Thanks.

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.