Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Creating dev file for schgr

Gregory Thomas
Frequent Advisor

Creating dev file for schgr

Can anyone tell me how to create a device file for the schgr driver? It's on an HP-UX 11.0 system running on an L2000. Thanks.
4 REPLIES
Sanjay_6
Honored Contributor

Re: Creating dev file for schgr

Hi Scott,

Just enable the schgr driver in the kernel, rebuild the kernel and reboot the box. This should create the required device file for you. IF the file does not get created at eboot, run the command "insf -e" to create the device file manually. Now do a "ioscan -fn" to see if the device files have been created. They are usually called /dev/rac/cxtydz.

Hope this helps.

Regds
Michael Tully
Honored Contributor

Re: Creating dev file for schgr

Hi Scott,

I've attached a document which describes
the whole procedure. If you need to create
a device to control a robotic arm for
a tape library or autochanger, this is
also included.

HTH
-Michael
Anyone for a Mutiny ?
Michael Tully
Honored Contributor

Re: Creating dev file for schgr

This time I'll actually attach the document....
Anyone for a Mutiny ?
James George_1
Trusted Contributor

Re: Creating dev file for schgr

configuring the kernel with schgr could solve your problem.

James
forum is for techies .....heaven is for those who are born again !!