Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

DAT 72 USB mounted in SCO 5.0.7

BryanT_7
Occasional Visitor

DAT 72 USB mounted in SCO 5.0.7

Has anyone successfully mounted a DAT 72 USB tape drive within SCO 5.0.7? This new drive connects to the USB connected thats built onto the internal side of the MB.

Here are the steps we are taking to try to mount it. Maybe we have the channel set wrong or somethig?

When we run sconf -v we see
stp usb_msto 0 0 0 0

We Run these Settings:
1. # mkdev tape
2. 1 Configure a SCSI or Enhanced IDE Tape drive
3. 1 Install SCSI Tape Drive
4. Host adapter = usb_msto
5. What channel = 0
6. Target ID = 6
7. LUN = 0
8. Upadate SCSI Config? Y
9. Select default for next three questios.
10. Choose 4 for DAT Drive
11. Rebuilt kernal.


3 REPLIES
Torsten.
Acclaimed Contributor

Re: DAT 72 USB mounted in SCO 5.0.7

You should check if the drive is supported for this OS.

As an example, this drive is supported with an Integrity server, but only with Linux and Windows, but currently not with HP-UX or VMS.
You can see it, but you cannot use it with HP-UX.

Maybe the same with your OS?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
BryanT_7
Occasional Visitor

Re: DAT 72 USB mounted in SCO 5.0.7

Turns out the SCO Unix site says that 5.0.7 does support the ML350 G5, but they do not support the DAT 72 USB until SCO v6.0.

Thanks for the input....
kingswaygroup
Occasional Advisor

Re: DAT 72 USB mounted in SCO 5.0.7

To my recollection we have not used the HP DAT USB prior to OpenServer V6 but we have used the IOMEGA REV on USB on 507 a few times so I know the USB can work. May I suggest that you if you are using either Microlite BackupEdge (our choice) or Lone-Tar that you check with these vendors as they may know whether these drives have been used under USB & 507.