Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

DLT4000 Dead after Firmware upgrad using L&TT

Andrew Moore_3
Occasional Advisor

DLT4000 Dead after Firmware upgrad using L&TT

After upgrading the firmware of a DLT4000 to version V150/CPQ-2 the OS no longer sees the drive. L&TT dosn't eather. I've rebooted, refreshed, etc and not luck. I was able to connect an external DLT4000 I had but need to get the internal one going. Any suggestions?

Thanks.
That shouldn’t be a problem
1 REPLY
Andrew Moore_3
Occasional Advisor

Re: DLT4000 Dead after Firmware upgrad using L&TT

It's Alive. Had to reboot the server and it recognized the drive. Had tryied it before but who knows.
That shouldn’t be a problem