Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

DP 5.5 - Mount Request

fmargari
Advisor

DP 5.5 - Mount Request

after migrating to DP 5.5, when we receive a two mount requests in the same backup, we got this messagge after confirming one of them:

From: BSM@backup."XXX_backup" Time: 12/05/2007 09:37:48 p.m.
[60:1025] The device is still in use by a media management operation.

is any solution for this to above this problem in the mount request.

Thanks for your help,



2 REPLIES
Ivan Ferreira
Honored Contributor

Re: DP 5.5 - Mount Request

When we first installed Data Protector 5.5, it had a lot of bugs.

Ensure that you have all patches applied, or you will have a lot of problems.

Here is the link for the patch list by os type:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3188925〈=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=18964&prodSeriesId=3188924
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Aashique
Honored Contributor

Re: DP 5.5 - Mount Request

Hi,
This mounting request comes...When the driver is busy,the tape is full or the barcode scanning problem happened that times the mounting request comes.
So please scan the barcode scan if you are using barcode in the tape.
Add some tape to the pool.Abort the current session and start again.

Thanks & Regards

A. Aashique