Device I/O control error on Bus 0, Target 0, Lun 0

[David Paris AKA Mixmast]

Hi to everyone,

i have a problem with a MSL 5026 1x SDLT, when i execute a robtest he report me an error:
Device I/O control error on Bus 0, Target 0, Lun 0

This MSL are connected to a DL380 G3
with a PCI- Hp 64-Bit/133Mhz PCI-X 2 CH ultra320 HBA.

Thkx for your help

[Satish M.S.]

Mixmaster:

Robot/Picker: Device I/O control error on Bus 0, Target 0, Lun 0

Robtest, if I am not mistaken, this must be a utility that can be executed via Netbackup

I think the issue is more related to a robot communication issue. It could be as trivial as for the fact that robtest may be pointing to the incorrect path.

Kindly do see the following document from Veritas:

http://seer.support.veritas.com/docs/276893.htm

Do let us know the progress:

Thanks

Satish

[David Paris AKA Mixmast]

Hi,
a solved this problem with a firmware upgrade to the MSL.
After the upgrade the error disapear.

Thks for everything

[David Paris AKA Mixmast]

I made a firmware upgrade to the MSL and redefine the id´s in the veritas.

Thkx to everyone.