Direct Attach MSL6000 with HPUX and Solaris

[Jimmy_58]

Hello
Please your help tell m if is possible to connect directt Attach my librery MSL6000 with a NSR E1200-FC with an equipment HPUX and an Equipmente Solarys

What will be the configuration for this
regard
Jimmy

[Marino Meloni_1]

You cannot attach the nsr to two different server (hp-ux and solaris) in the same time because this nsr have only one FC port, then Point-to-Point connection can only be connecte to one host.
To know if you can build a specific config, you need to know all the components involved, not only the os. The backup application, the HBA model etc... have to comply to the matrix.
Iyou want to know if the configuration you want to build is supported, here is the compatibility matrix:
ftp://ftp.compaq.com/pub/products/storageworks/techdoc/ebs/EBSMatrix-1106.pdf
and the design guide, full of all you need:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00775232/c00775232.pdf

the main link foe Enterprise Backup is here:

www.hp.com/go/ebs