Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

EML245e Tape load problem By Mail slot

Imtiaz Ahmed
Occasional Contributor

EML245e Tape load problem By Mail slot

Since last few days, Icannot load Ultrium LTO tape in the EML245e library through Mail slot. When I pressed the Operation->unload port option from the LCD panel, it has shown the following messages in the LCD Panel. For your information, Tape library is working fine and we are taking our daily scheduled backup as usual. And I have already soft rebooted the tape library by Comand View TL but still showing the same messages.

LCD Message:

“All load ports are being opened. Load ports configured as storage cells cannot be opened. All load ports must be closed to continue use of any load port”

So,I need expert comments on this issue.

BR

IA
3 REPLIES
MajidNX
HPE Pro

Re: EML245e Tape load problem By Mail slot

You have not configured load ports on your library
To configure you will have to go to OCP

Home >> Configuration Screen >> Configure Load Ports
I work for HP
Imtiaz Ahmed
Occasional Contributor

Re: EML245e Tape load problem By Mail slot

I saw in the OCP-


LP1: Load port LP2:Load Port

should I change Load ports to Slot? because there is only two option
1. Load Ports
2. Slots
BR
Imtiaz
Imtiaz Ahmed
Occasional Contributor

Re: EML245e Tape load problem By Mail slot

I already solved.