Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

ESL322e and HP SIM

SOLVED
Go to solution
Rafanto
Advisor

ESL322e and HP SIM

Hi,

I have a problem... I adding the library to HP SIM, but I receive in the list as "Unknown". The equip should be identified as "Tape Library"

I configured through the Command View TL the SNMP trap to the CMS IP address...

Please your help and opinions...
7 REPLIES
Steven Clementi
Honored Contributor

Re: ESL322e and HP SIM

What is the firmware version on the library?

What version of SIM are you running?


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Rafanto
Advisor

Re: ESL322e and HP SIM

Hi,

The ESL FW is 7.00.60

The SIM version is 5.3 build C.05.03.01.00

I attach this info.

Tks!!
Curtis Ballard
Honored Contributor
Solution

Re: ESL322e and HP SIM

You are correct that SIM should identify that correctly as a tape library. We've gone through that several times to make certain it works correctly but maybe something broke. I'll check and see if we have that configuration running.
Curtis Ballard
Honored Contributor

Re: ESL322e and HP SIM

It looks like you are still at Interface Manager firmware I232. There was a problem with the identification that was fixed in Interface Manager (IM) firmware a while back and I believe it was after that release. I verified that it was tested with release I250.
Rafanto
Advisor

Re: ESL322e and HP SIM

OK thanks for your response... I will review... I will comment you the results...
Curtis Ballard
Honored Contributor

Re: ESL322e and HP SIM

We looked into the test results further and confirmed that identification with SIM did not work correctly with IM firmware I232.
Rafanto
Advisor

Re: ESL322e and HP SIM

OK, thanks, this weekend I will test.

Tks for your time...