Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Error Message at the startup

Ayman Altounji
Valued Contributor

Error Message at the startup

I am getting the following error message. A conflict has been detected between two drivers which claimed two overlapping Io port regions. Driver cpqatapi, with device <\Device\ScsiPort1.Translated>, claimed an IO port range with starting address in data address 0x28 and 0x2c, and length in data address 0x30.

Please help!!!!!!!!!!
2 REPLIES
Ayman Altounji
Valued Contributor

Re: Error Message at the startup

What Server this tape unit is installed? Has this tape unit been up and running and now you just receive this message or was there another device, patches or upgrades applied to the server and this message comes up now? What backup software and version you are running? If this is the first time the tape unit being installed, make sure that the tape unit is seen on POST Screen and System Configuration Utility has been accessed to recognize and address any conflicts.
Ayman Altounji
Valued Contributor

Re: Error Message at the startup

This 12/24GB DD3 dat tape is installed on AP400 professional workstation. I am using the Sea Gate Backup Exec ver 7.0 rev 727 to do the backups. I have been using this tape drive for a while before I started getting this error message.
The operating system running on this server is windows nt 4.0 service pack 3.