Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Fault Code 20C0 soft on MSL5000

Mark Romiti_1
Occasional Contributor

Fault Code 20C0 soft on MSL5000

Getting a 'Fault Handler', 'Fault Code 20c0 (soft)' on a MSL5000 unit with two SDLT drives. The cleaning tape is stuck in the SDLT drive 0, drive 1 is fine. Drive 0 has been disabled in BackupExec for now.
2 REPLIES
Sameer_Nirmal
Honored Contributor

Re: Fault Code 20C0 soft on MSL5000

AwadheshPandey
Honored Contributor

Re: Fault Code 20C0 soft on MSL5000

â ¢ Press the Enter button to clear the
message.
â ¢ Ensure the drive shows good status
through the drive status window.
â ¢ Check SCSI ID settings.
â ¢ Cycle power to the library or reboot
using the GUI touch screen.

Awadhesh
It's kind of fun to do the impossible