Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Fault Code: 3013 error

Antolin Guza
Occasional Visitor

Fault Code: 3013 error

Hi All!
Please help me i cant backup for this error,
give me a advice to solve the problem.
Thanks,
Antolin

Fault Code: 3013 (Soft)
Description: Drive Fetch Failure
3 REPLIES
Torsten.
Acclaimed Contributor

Re: Fault Code: 3013 error

Do you have a clue how many different libraries are out there?

Model?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
P Muralidhar Kini
Honored Contributor

Re: Fault Code: 3013 error

Hi Antolin,

>> Fault Code: 3013 (Soft)
>> Description: Drive Fetch Failure
This problem may be resolved by the latest firmware v5.16 release for
MSL5000 and MSL6000 libraries

Check the following support communication -
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00631596

Also, check the following threads for discussion on a similar problem -
https://community.hpe.com/t5/forums/searchpage/tab/message?q=Fault+Code%3A+3013+error
https://community.hpe.com/t5/Tape-Libraries-and-Drives/SSL2020-fault-code-3013/m-p/4909943/highlight/true#M28004
Hope this helps.

Regards,
Murali

Let There Be Rock - AC/DC
Ganz
Trusted Contributor

Re: Fault Code: 3013 error

Hi Antolin,

One of the reasons you may get this error could be due to stray tapes that might have fallen in the library which might hinder the robotic movement. Ensure all tapes are correctly seated in the magazine slots. The firmware for the library should be 5.20 as that is the last active release.