HP 1/9 Ultrium C7145 installation

[John Jacobs_1]

I have added the above referenced drive to an HP system running hp-ux 11.0.
When doing an ioscan this device shows up as unclaimed but the drive inside shows as "stape".

What procedures do I need to do in order to make this changer claimed as "autoch"

output below:

0/1/3/0.0 target
0/1/3/0.0.0 unknown HP C7145
0/1/3/0.3 target
0/1/3/0.3.0 tape HP Ultrium 1-SCSI

[Eugeny Brychkov · Accepted solution]

Hi John,
go to SAM, kernel configuration, and include driver 'schgr' into kernel. Rebuild kernel and reboot. After reboot autochanged will be claimed with this driver
Eugeny

[John Jacobs_1]

Thanks, this is exactly what I needed.