HP SureStore DAT40x6 & K460

[Serhiy Cherpatyuk]

Hello.

I connect HP SureStore DAT40x6 (C5717-60013) to the K460 with HP-UX 10.20 via HP 28696A - Wide SCSI Card (10/4/4). Run ioscan and did not find it.
Can you help me?

Serhiy Cherpatyuk.

P.S. This thread has been moved from Archival Products to Tape Libraries and Drives - HP Forums Moderator

[Eugeny Brychkov]

Serhiy,
DAT40x6 autoloader has Ultra Wide LVD interface. So you should use 50-68 pin adapter cable to connect K-class SE HBA and autoloader.
Please check this cable, and terminator at the end to be 'LVD/SE' type.
Please check with manuals available at http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&docIndexId=3124&locale=en_US&prodSeriesId=42856&prodTypeId=12169
Eugeny

[Serhiy Cherpatyuk]

Thank you, Eugeny.

I'll check connection and read manuals. But that autoloader with same cable & terminator works with windows machine.

Serhiy Cherpatyuk.

[Eugeny Brychkov]

Then check this K-server adapter (for example connecting another device). Could you please attach 'ioscan -fn' output (made when drive's connected) to your next reply?
Eugeny

[CA486125]

Heads up.

The K460 only has HVD interfaces. You either need a HVD/LVD convertor or use it as Single Ended.

[CA486125]

Suggest you post this on the other side under Servers and also under Storage.

http://www.itrc.hp.com