1748288 Members
3259 Online
108761 Solutions
New Discussion юеВ

Re: HP Tape Drive

 
kunda
Occasional Contributor

HP Tape Drive

Sorry i have a small problem with the My tape Drive give me this error on

|__ Test 'LTO firmware to data tape converter' started on device 'HP Ultrium 1-SCSI' at address '4/0.4.0'
||__ This script will convert an existing firmware update tape back to a data tape. Continue?
||__ Please present the cartridge for loading (but don't load it)...
||__ Analysis Results
||__ Firmware to Data Tape started
||__ A tape is already loaded. Please unload the tape and try again.

is any where i can resove this Problem.
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: HP Tape Drive

Why you need a firmware update tape?

Why not update with LTT?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
V├нctor Cesp├│n
Honored Contributor

Re: HP Tape Drive

You do not need to run all the possible tests in L&TT. Some of them, like cooling test, firmware tape creator or this one are only for special cases.

And this one is simply telling you that the tape must be in the drive, but not loaded before you start the test.