Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Ultrium 2SCSI_1 could not be opened("Device could not be accessed")

CU_1
Occasional Advisor

HP Ultrium 2SCSI_1 could not be opened("Device could not be accessed")

hello
we are using MSL6000 library connected with two rx4000 servers(RAC)the primary server couldn't access the drive, I run the ioscan :
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
tape 2 0/2/1/0/4/0.1.6.255.0.0.1 stape NO_HW DEVICE HP Ultrium 2-SCSI
/dev/rmt/2m /dev/rmt/2mn /dev/rmt/c13t0d1BEST /dev/rmt/c13t0d1BESTn
/dev/rmt/2mb /dev/rmt/2mnb /dev/rmt/c13t0d1BESTb /dev/rmt/c13t0d1BESTnb
tape 4 0/2/1/0/4/0.1.6.255.0.0.2 stape NO_HW DEVICE HP Ultrium 2-SCSI
/dev/rmt/4m /dev/rmt/4mn /dev/rmt/c13t0d2BEST /dev/rmt/c13t0d2BESTn
/dev/rmt/4mb /dev/rmt/4mnb /dev/rmt/c13t0d2BESTb /dev/rmt/c13t0d2BESTnb
tape 3 0/4/2/1.3.0 stape CLAIMED DEVICE HP C7438A
/dev/rmt/3m /dev/rmt/3mnb /dev/rmt/c15t3d0BESTn /dev/rmt/c15t3d0DDSb
/dev/rmt/3mb /dev/rmt/c15t3d0BEST /dev/rmt/c15t3d0BESTnb /dev/rmt/c15t3d0DDSn
/dev/rmt/3mn /dev/rmt/c15t3d0BESTb /dev/rmt/c15t3d0DDS /dev/rmt/c15t3d0DDSnb

H/W state: No H/W what is the problem??? It was working befor three days!!!
1 REPLY
ANNIE
Trusted Contributor

Re: HP Ultrium 2SCSI_1 could not be opened("Device could not be accessed")

Hi,
Check out this link,
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1008133

Thanks.
----------------------------------------------------------------------------------------------------------------------------------
** If found useful, please assign kudos located at the left hand side.
Thanks.

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.