Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

HPUX 11.11i, MSL6000 Series Library w/Netbackup 5.0 install problems

Leahi
Frequent Advisor

HPUX 11.11i, MSL6000 Series Library w/Netbackup 5.0 install problems

OS: HPUX 11.11i
Tape Libray: MSL 6000 Series Library with Ultrium 3 SCSI
Backup app: Veritas Netbackup 5.0

OS can't see tape drive. The stape driver is no longer seen by ioscan -fnC tape; but stape driver exist in kernel configuration.

Able to move robotic arm on MSL6000; but, we can't write to tape.

Any help is appreciated.

Note: We spent two days with HP and Veritas tech supports.
1 REPLY
Torsten.
Acclaimed Contributor

Re: HPUX 11.11i, MSL6000 Series Library w/Netbackup 5.0 install problems

Hi,

you must see the tape in ioscan to make this work. Check cabeling and if present, the NSR mapping.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!