Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

How can I MAP NSRe1200-600 with HP9000 rx5670 Server

How can I MAP NSRe1200-600 with HP9000 rx5670 Server

Hi All,

I have installed Two rx5670 Server(HP-UX 11.23) and One MSL6030 Tape Libraries with NSRe1200-600 connected through SAN switch.

How can I MAP the Server at Network Storage Router and Discover MSL6030 at Server?

Thanks

Khairul
2 REPLIES
David Ruska
Honored Contributor

Re: How can I MAP NSRe1200-600 with HP9000 rx5670 Server

You need to go into the NSR web interface (visual manager), setup a map, and assign it to your two hosts.

The installation poster highlights the necessary actions in step 10: http://h200007.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_289157-003_poster/TPM_289157-003_poster.pdf

You can also refer to the user manual if you need more help:
http://h200007.www2.hp.com/bc/docs/support/SupportManual/lpg29075/lpg29075.pdf
The journey IS the reward.
Naser_1
Occasional Visitor

Re: How can I MAP NSRe1200-600 with HP9000 rx5670 Server

Hi Ruska thanks!

I am confused about the 'Hi' and 'Lo' portion of Port WWN (the fcmsutil shows: N_Port Port World Wide Name = 0x50060b00002379cc). Please identify them for me.

Also please guide how to fill the Host Id and Map Name in Mapping (Add Host) of VM.

best wishes
Khairul