Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

How to check hot swapping

pranay142
Occasional Advisor

How to check hot swapping

The ignite tape drive on one of our server has gone faulty and hp has suggested to replace it. The server is at a remote location and I can not go and check if it supports hot swapping or not.

Is there a way I can check if it can be hot swapped or not?

Thanks in advance.

1 REPLY
Torsten.
Acclaimed Contributor

Re: How to check hot swapping

Is it external? in a "tapearray" chassis?

Then it is

 

HP-DAT-40-C7497C-1-DVD-RW-In-HP-StorageWorks-5300-Tape-Array-C7508-60065-5244-p


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!