Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

I would like to buy a surestore DAT 40*6 Autoloader but,

Eduard Vrieling_2
Occasional Visitor

I would like to buy a surestore DAT 40*6 Autoloader but,

I'm planning to buy a DAT 40*6 autoloader but I have the following questions.
Can i connect this device to my IBM serveRaid-3H raidcontroller or my adaptec
2940 scsi controller.
Can I use this device under Netware 5.
and can I use this device under ArcserveIT 6.61.

 

 

P.S. this thread has been moved from Archived Desktops and Workstations Boards > general to Tape Libraries and Drives - Hp Forums Moderator

1 REPLY
Bob Light
Frequent Advisor

Re: I would like to buy a surestore DAT 40*6 Autoloader but,

Eduard,

There are two versions, internal C5716A and the
external C5717A. They are supported under Netware 5
but have not been tested with ArcServe. You will need
to contact ArcServe. The internal model will work with a 2940 but the external
model will require a 68 pin LVD card such as 2942U2. Contact Adaptec for
suggestions on a card if you are going to use the external model. The external
model comes with a cable.

This information comes from the HP Customer Information Center.