Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

INSTALLING AUTOLOADER 1/9

Irving Lopez
Advisor

INSTALLING AUTOLOADER 1/9

After install the autoloader 1/9 in HPUX 11.00 the sam /Backup and Restore / Interactive backup ... show the device like a MO.
I tried with the spt driver and the r. arm get an Unclaimed status, so i'm still using the sctl driver.
The interface is c720 and schgr driver is in the kernel

The line i'm used to compile the kernel with the driver was

driver 0/10/0/0.0.0 sctl

Thanks,

TMRND

TAMA
1 REPLY
Michael Tully
Honored Contributor

Re: INSTALLING AUTOLOADER 1/9

Hi Irving,

I had a similar problem wich was solved using
the attachment I have for you, which is a
white paper from HP concerning this. There is
a couple of gotchas that you have to be careful
with especially the use of sctl as opposed to
using spt. Be aware of those and you should
be okay.

Gook luck
Michael
Anyone for a Mutiny ?