Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Installation / LED status

Ayman Altounji
Valued Contributor

Installation / LED status

Where is the best place to install a 35 GB AIT drive in a configuration with a DL380 and a Storage Works 4314R enclosure. The manual says the Storage Works but someone else told me to install it in the server (drive bays full in the server). On a side note, when it's installed in the 4314, the Fault indicator LED lights up on the front panel. Remove the tape drive and it goes away. Is this normal? Backups are performing OK.