StoreEver Tape Storage
1748146 Members
3746 Online
108758 Solutions
New Discussion юеВ

Issues with DLT7000 and TTL

 
ARosenthal
Occasional Contributor

Issues with DLT7000 and TTL

Yall
recently I updated my Compaq TH6EA-HK to firmware V109/CPQ-1 and since then the write-protected light became always on whenever a tape is loaded. I have tried to go back to the previous V097 but I cannot since the selectable says downgrading, need password, and I do not know where to add/find said password.

No other frm works since they are all marked as wrong personality.

Can anyone help me please??
Cheerio
AR
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Issues with DLT7000 and TTL

Are you asking about LTT (library and tape tools)?

Please tell me the use of a password if you can find it anywhere on the internet?

You have to call HP support. They can give you a temp password to enable the FW downgrade. You should also consider to ask them about your problem.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tkc
Esteemed Contributor

Re: Issues with DLT7000 and TTL

Refer to :

http://h18006.www1.hp.com/products/storageworks/ltt/qa.html

The L&TT team maintains a mailbox for all tool queries. Please send us your questions via email to ltt.team@hp.com.

You should get the temporary password from the LTT team.