Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

LT&T: first scan with Ultrium 920 SCSI completes with errors

Clemens Kussbach
Occasional Visitor

LT&T: first scan with Ultrium 920 SCSI completes with errors

I am encountering the following problem with a newly installed ultrium 920 scsi-drive: when starting LT&T, the initial hardware scan results in a "scan completed with errors". The drive is however found and there is no visible clue what kind of error really has occurred.
Previously the LT&T Installation Check run without any problem.
Here some configuration details:
Device: HP StorageWorks Ultrium 920 (1) SCSI Tape Drive in 1U Rack-mount Kit
Controller: HP SC11Xe Host Bus Adapter
1 REPLY
TapeDrive Killer
Trusted Contributor

Re: LT&T: first scan with Ultrium 920 SCSI completes with errors

This is normal if you are able to see the tape drive with a blue color then it was detected properly if not make sure backup services are stopped as well as removable storage.

Pablo Alvarado Siles
One drink away from sleeping on the pavement