Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

LTO4 w SmartStart 4600

Ronand
Occasional Visitor

LTO4 w SmartStart 4600

Hello all,

i'm getting an event ID 11 every time i try to run a backup job using BackupExec 12. the job just dies. the equipment i'm using:

HP DL380 G5
Smart Start 4600 4 port
2 HP LTO4 hotswap modules

All this equipment is brand new, except the scsi cables. i tried diffrent ones.

Can anyone help me, i've tried too many things to write on the Thread.
1 REPLY
Torsten.
Acclaimed Contributor

Re: LTO4 w SmartStart 4600

Don't know what drive model do you have exactly and what is "Smart Start 4600 4 port"?

Anyway, check the compatibility here.

http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/13-0003-0001.html#matrixtable


For example this page is about

HP ProLiant DL365 G5
and
EH854A - HP StorageWorks Ultrium 1840 SCSI External Tape Drive

http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/Detail/16-0043-0177.html#CONTROLLERS


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!