Library not seen from server

[Ayman Altounji]

I have a TL891DLX library attached to a Compaq Data Router. This router is connected to the Compaq 2200 SAN switch. From the SWCC software I can see the Library devices (ID 1, 2 and 3) but from my NetWare console I can see only de Data Router and NOT the attached devices.

What to do?

Marco

[Ayman Altounji]

I have the similar problem with my Net Ware 5.1 server. I can see the library and DLT drives with my NT 4.0 server but not in NetWare 5.1 server. My NetWare 5.1 server is with Compaq FC Adapter (120186-B21). I hope there is some driver parameter which can solve my problem. However, I couldn't find any document about this.

[Ayman Altounji]

My problem has been solved by using the right cabling. The first ones I used were to long...

[Ayman Altounji]

Currently, support for Digital Alpha and higher-end Storageworks products is not on this forum. If you are in the US or Canada, call 1-800-354-9000. If you are elsewhere, please contact our nearest offices for support information or check any service contracts you may have for the product in question.