MSL 4048 BE 2010 error "0xe00084f4 & "V-79-57344-34036" - an unknown error has occurred"

[Scott Vitelli]

I have the MSL 4048 (2 LTO-4 drives, SCSI) connected to a deadicated media server (HP Proliant DL380/G7/) running server 2008 R2/64 bit via a HP SC11Xe Ultra 320 SCSI card. I have run the HP Library & Tape tools utility to get the firmware up to date and the dirve/lib tests passed.

The backups will run from 5-10 hours (10 hour job =726.379,544,846 bytes) before it fails with the ''0xe00084f4" and ''V-79-57344-34036 - An unknown error has occurred'' message.

Any insight (pardon the HP pun) would be greatly appreciated!

-Scott

Alt, GA

[Eric_de_Lange]

I do not use BE but a google search results in suggestions around BE configuration settings.

Most notable are:

http://www.symantec.com/connect/forums/backup-disk-failing-error-0xe00084f4-unknown-error-has-occurred

http://www.symantec.com/connect/forums/job-fail-half-way-0xe00084f4-unknown-error-has-occurred

hope this helps,

-Eric