MSL 5026 Auto-Clean

[Mark Poeschl_2]

I've got an MSL5026 (firmware version 5.13) with the auto-clean feature enabled. Is there any way to tell how many times the cleaning tape has been used? Something other than walking up to the front panel would be preferred. ;-)

[Art Wiens]

If your library is connected to Ethernet, and has an IP address set, you can browse to it for management purposes. The default admin password is "2".

Select (click) on one of the drives and choose detailed status, it gives a count for how many cycles have occured on the cleaning "tape".

HTH,
Art

[Mark Poeschl_2]

Thanks - that's perfect.