Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 5026 and Legato

Holger Mehlkopf
Occasional Advisor

MSL 5026 and Legato

We've got two MSL 5026 Tape Libaries, 4SDLT drive's and NSR m2402 2/4.
If we power UP the MSL all seems correctly but if Legato Networker starts a backup job, suddenly legato comes up with the message Unablbe to find Barcodes.

We Update BIOS of the Server to latest version.
IRQ Sharing has to be enabled (SCU ??? Advanced Set-up).
Apic Mode set to ???Full Table??? (SCU ??? Advanced Set-up).
Storage_Works_Controller got IRQ 11 not shared

The latest available firmware was implemented for the drives and the Robotic. The RObot got SCSI ID 1 .

THe configuration of th NSR is correctly.

If we starts an Inventory of the Libaries the reader find all Barcodes .... Have anybody an idea whats happend?
D
1 REPLY
Holger Mehlkopf
Occasional Advisor

Re: MSL 5026 and Legato

now we got the same problem with ArcServe 9. Is it possible that this comes from the new firmware 4.14?
D