Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 6000 & D.P. 5.5

SysTeam
Advisor

MSL 6000 & D.P. 5.5

We recently purchased and installed an HP MSL 6000 Tape Library and connected it to an RP8420 HP-UX 11.11. HP installed the Tape Library and the O/S picked up that changes. I go to D.P. 5.5 and autoconfigure device and all it adds the Tape Library as a device. I have D.P. try to check/scan a slot, i.e. slot 1, and D.P. returns the following error: [90:59] rp8420.com : /dev/rmt/3mn Cannot open exchanger control device ([6] No such device or address).

Any help in this matter is greatly appreciated.
1 REPLY
Ian Vaughan
HPE Blogger

Re: MSL 6000 & D.P. 5.5

Howdy,
Do you have the "schgr" device driver compiled into your kernel?
Go into sam-> kernel configuration -> modules
and add it in you will be prompted to agree to rebuild the Kernel - say Yes.

When the box reboots it should pick up the library robot ( if not an "insf -e" will fix it - at the moment it is being addressed as a tape drive - that is where the problem lies.

Rescan within DP for the device to use as the library robotic - it should turn up as /dev/rac/cXtYdZ.

Regards
Ian
Hope that helps - please click "Thumbs up" for Kudos if it does
## ---------------------------------------------------------------------------##
Which is the only cheese that is made backwards?
Edam!
Tweets: @2techie4me