Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 6030 самопроизвольная перезагрузка

RuslanL
Advisor

MSL 6030 самопроизвольная перезагрузка

проблемы в работе ленточной библиотеки.  журнал событий двух установленных NSR во вложении. 

7 REPLIES
Torsten.
Acclaimed Contributor

Re: MSL 6030 самопроизвольная перезагрузка

I understand the NSR has rebooted, but the logs show only a manual reboot (power cycle). Can you give more details, please? The first log is from 2008, not relevant.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RuslanL
Advisor

Re: MSL 6030 самопроизвольная перезагрузка

ленточная библиотека MSl 6030 (2drv LTO4) поддерживает ли установку двух NSR ? ??? Версии прошивок библиотеки  актуальны.  ручная перезагрузка вызвана потерей соединения с  установленной NSR. результат подключения по COM к NSR во вложении. 2008 год отредактирован в параметрах карты. 

Torsten.
Acclaimed Contributor

Re: MSL 6030 самопроизвольная перезагрузка

Could you please post in english? So more people can join the conversation.

Your attachments is showing the low level boot menu. If your NSR always boot to this menu, then the NSR is broken.

The MSL6030 supports 1 NSR.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RuslanL
Advisor

Re: MSL 6030 самопроизвольная перезагрузка

router running for 10 minutes after starting the library.

Torsten.
Acclaimed Contributor

Re: MSL 6030 самопроизвольная перезагрузка

mighbe a temperature problem. There is a small fan mounted to the top chassis cover (above the NSR) for cooling, but AFAIR not monitored. Check if this is running.

But since the NSR boots into the "emergency" menu, it might be almost dead and needs replacement.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RuslanL
Advisor

Re: MSL 6030 самопроизвольная перезагрузка

NSR fan operates. Router from a new shipment. Firmware up to date. After turning the router is available in the library for a few minutes.
Torsten.
Acclaimed Contributor

Re: MSL 6030 самопроизвольная перезагрузка

Strange...

 

I would do the following:

 

Keep an serial terminal connected to the NSR and watch the output. Maybe you can find something while the NSR reboots. Try the other slot of the MSL (even if it is not recommended - just for test. It could even be a power problem, maybe on the slot.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!