MSL 6030 2 Ultrium 460 drives connectivity problem

[Randy Supangat]

Please see the attachments to see what the back of my drives looks like.

[Randy Supangat]

Note: the scsi port that you can see in this picture is part of another server.

[Torsten.]

Reading the current quickspecs

http://h18000.www1.hp.com/products/quickspecs/11863_div/11863_div.html

is showing only the LTO-3 and 4 drives as supported - all are non hotplug.
So I assume the chassis connectors are no longer there - this chassis does only support the newer drives. Ask your vendor!

[Randy Supangat]

Thanks Torsten. I will ask the vendor.

[Rob Leadbeater]

I'll take a guess that the connectors might be covered by the panel that you can see in the picture...

If not, then sanity check the part numbers of the drives you've purchased.

Cheers,

Rob