Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 6060 - enable level 2 user, now master can't see slaves

f. halili
Trusted Contributor

MSL 6060 - enable level 2 user, now master can't see slaves

Hello Everyone,

I enabled Level 2security, and after the reboot the master tape libary can't see the slave. How do I revert back to level 1 security/

thanks,
f. halili

2 REPLIES
Torsten.
Acclaimed Contributor

Re: MSL 6060 - enable level 2 user, now master can't see slaves

IMHO this cannot be related.

Something else changed (hardware, IP address (!), cables)?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Uros6789
Occasional Visitor

Re: MSL 6060 - enable level 2 user, now master can't see slaves

Did you ever find a solution to this problem?