Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 6060, fault symptom code 3106

diaug
Occasional Contributor

MSL 6060, fault symptom code 3106

Hello,
error appear with the MSL 6060 fsc=3106 when using mail box, with the other message : picker jammed 6.
Firmware version : 5.16

to suppress the problem, i turn off power and power on, and it is ok again, and no problem when the MSL is saving on tapes

thanks
7 REPLIES
Rob Leadbeater
Honored Contributor

Re: MSL 6060, fault symptom code 3106

Is that no problem, or is there now a problem...?

Cheers,

Rob
Torsten.
Acclaimed Contributor

Re: MSL 6060, fault symptom code 3106

This can be related to the firmware. Update to 5.20!

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=316040&prodNameId=316112&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=co-12812-36

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Rajanikant
Trusted Contributor

Re: MSL 6060, fault symptom code 3106


Hi,

Also check if the media is inserted into the magazine properly and nothing is obstructing the Robotic path in the library

regards
Raj
Regards

Raj

How to assign points? Click the KUDOS! star!
diaug
Occasional Contributor

Re: MSL 6060, fault symptom code 3106

Hello ,

i have change the firmware version 5.20 and the problem is the same, i have saw that the problem is only with the mail box when the robot put a cassette in the mail box it did'nt insert it full inside, but for all the other slots it is ok; what to do ?
Rob Leadbeater
Honored Contributor

Re: MSL 6060, fault symptom code 3106

Hi,

I would probably look to exchange the magazine as a first attempt...

I don't recall whether the upper and lower magazines are the same. If they are, try swapping them round and see if the problem moves with the mag.

Cheers,

Rob
diaug
Occasional Contributor

Re: MSL 6060, fault symptom code 3106

i have replace the upper left magazine and it seem to be ok . thanks a lot .
Rob Leadbeater
Honored Contributor

Re: MSL 6060, fault symptom code 3106

Cool. Remember to say thanks by assigning points...

Cheers,

Rob