Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 6060 master FW upgrade 5.20 failed, slave got upgraded to 5.20

Thiyagarajan R
Occasional Contributor

MSL 6060 master FW upgrade 5.20 failed, slave got upgraded to 5.20

Tried to upgrade the FW of the MSL 6060 to 5.20. The FW upgrade failed and now have a situation where the Master module is at revision 5.16 and the Slave module
is at revision 5.20. The Slave module displays a message saying that it is waiting for the Master upgrade to complete before it reboots. Thought of these options: 1.Break the master and slave apart.2.Make master standalone.3.Then upgrade master to 5.20,
4.Once upgraded put both back into master/slave configuration. But would like to how to break the master/slave, and put back the configuration. Can anyone help to advise

3 REPLIES
Torsten.
Acclaimed Contributor

Re: MSL 6060 master FW upgrade 5.20 failed, slave got upgraded to 5.20

You can do this from the front panel (password needed?) or just use the MSLUtil.exe tool via serial connection.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Thiyagarajan R
Occasional Contributor

Re: MSL 6060 master FW upgrade 5.20 failed, slave got upgraded to 5.20

Thanks Torsten for your reply. Could you be able to provide me the procedure or any reference any material that i can refer for this issue.
Torsten.
Acclaimed Contributor

Re: MSL 6060 master FW upgrade 5.20 failed, slave got upgraded to 5.20

Scroll down to firmware:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=hu&cc=hu&taskId=125&prodSeriesId=316040&prodTypeId=12169&objectID=c00023639

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!