Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL'S Error

ZoiloG
Occasional Contributor

MSL'S Error

Hi all,

I have one configuration master-slave with with three MSL5052S2 and sometime can see the follow error in the master:

"Some modules have not been detected during the physical inventory.
Some possibles causes are:
a)A defective sensor opto sensor in the module.
b)The module is not properly attached to XpressChannel hardware.

please,any help would be welcome

Thanks in advance
2 REPLIES
Torsten.
Acclaimed Contributor

Re: MSL'S Error

The master detects the slaves by 2 methods:

1) over ethernet connection between the library controllers.

2) by "sensing" the boxes using the "elevator" (PTM). Maybe one of the sensors has a problem.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ZoiloG
Occasional Contributor

Re: MSL'S Error

Hi Torsten,

The problem can be in the PTM sensor of master?
Several times only detect the first slave and all times no detect de second slave, I changed the second slave complete.

Over ethernet not problem.

Thanks