Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL2024 FC (4Gb) - Direct Attach w/HBA

SOLVED
Go to solution
Albatross
Regular Advisor

MSL2024 FC (4Gb) - Direct Attach w/HBA

Hi Folks,

We need to connect an MSL2024 Ultrium 960 FC/4Gb to a Proliant server. According to the EBS Design Guide, we can direct-attach (DAF) the library to an internal FC HBA, such as the FC2142 (Support for FC-Tape devices). The server will be running Windows 2k3 Srv, and HP Dataprotector 6.

Q. Are there any special concerns or suggestions regarding this setup?

Thanks in advance for your valuable responses,

Sergio
1 REPLY
Curtis Ballard
Honored Contributor
Solution

Re: MSL2024 FC (4Gb) - Direct Attach w/HBA

No special concerns with that configuration it should work very nicely and is simpler than a configuration using a switch. I ran that configuration myself for a while but have since added a B-Series switch.

I would recommend leaving the port configuration settings at the defaults of Automatic topology and Automatic speed and the drive is quite good at connecting correctly every time.