Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL2024

MICHAEL PANZER
Occasional Contributor

MSL2024

I have a question about the SCSI terminatore power lights on the MLS2024 tape library. I had an library running an older version of FW at 2.40, The library was replaced with a library running FW Version 4.40 On the older library, the SCSI terminator power lights were on and now with the newer libray, the power lights are off. I an using hte same 2 Ultrium tape drives, just moved to the new library. If I remove the SCSI cable off of the drive, the SCSI terminator power lights come on, and whne I plug in the SCI cable, the light goes out. Is this normal now with the newer version of FW It appears that the drive and library are operating normally.

 

 

P.S. This thread has been moved from Archival Products to Tape Libraries and Drives - HP Forums moderator

1 REPLY
MICHAEL PANZER
Occasional Contributor

Re: MSL2024

I forgot to say what kind of drive in thelibrary...hewre is the info...HP StorageWorks MSL2024 w/ 2 Ultrium 448 Drives The system is a Proliant 385 GE running Linux with QLogic HBA's