MSL4048 G3 Auto Power On

[ThomasO]

Hi All

I just got a new MSL4048G3 SCSI library.
I noticed that when I plugged in the power cables, the library didn't turn on automatically - it is still in stand-by mode or something.
My old MSL6060 library was turned on automatically.

This is a very important feature for example after a power outage. Without this feature, I have to physically press the power button.

Some help is appreciated.

Regards,
Thomas

[Curtis Ballard · Accepted solution]

The power switch state is latched so if the library was off when the power is removed it stays off. If the library was on when the power is removed it comes back on when power is returned.

[ThomasO]

Thanks a lot Curtis

I actually discovered this after posting my initial question.
I just had to do a bit more testing.

/Thomas