StoreEver Tape Storage
1748123 Members
3306 Online
108758 Solutions
New Discussion

Re: MSL4048 "MECHANICAL BLOCK" amber light error

 
Yaboto
Super Advisor

MSL4048 "MECHANICAL BLOCK" amber light error

I have powered off and on but the error message "MECHANICAL BLOCK" is still
persisting so we are unable to use the MSL4048 tape library.

 

Please help !

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: MSL4048 "MECHANICAL BLOCK" amber light error

Carefully pull the magazines and even the drive to inspect what is going on.

 

In case of doubt call HP, if the issue is a broken robot, the chassis must be replaced.

 

 

BTW, i have seen people putting the booklet of a tape inside the magazine by accident multiple times, this is causing strange errors.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!