Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL5000

Shaun Bull_1
Occasional Visitor

MSL5000

Hi,
I have an MSL5000. It's giving a "halt by scsi prevent allow command" when you try to open the magazine slots. I have enabled user levevls 1 and 2, even entered the service password. Is there another setting somewhere that I need to change.

All relies appreciated.
Shaun.
2 REPLIES
Kurt Beyers.
Honored Contributor

Re: MSL5000

Reboot the library once (power off / power on) and retry the operation then.

best regards,
Kurt
clay bowman
Frequent Advisor

Re: MSL5000

Simply go into your backup software, right click on the library name, in Backup Exec it's under Devices right click and select unlock. This will unlock the doors. You don't need to power cycle the library. After you change tapes right click the library again and select lock and you're set.