Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL5026 Error Code 3032

George R Tower
Occasional Visitor

MSL5026 Error Code 3032

Hi.
I just replaced a tape drive, library controller card, and SPS board in a Compaq MSL5026. When the library boots I get the following fault code:

Fault Code:3032(Soft)
Chassis Serial Number Character Count is not correct.

Any help with this is greatly appreciated.
2 REPLIES
Brian Bleijenberg
Frequent Advisor

Re: MSL5026 Error Code 3032

Hi

Did Run HP StorageWorks Library & Tape Tools (L&TT),what was the result?
And did you get this error code too:
(3031) after the first power on with the new
controller board.
This is expected because the
new controller board did not have this library's serial number stored in memory.
Or maybey there is a previous serial number
stored in there that doesn't match

Greetz
Brian Bleijenberg
MASE HP SAN ARCHITEC
Alvaro_11
Occasional Advisor

Re: MSL5026 Error Code 3032

Hi.

I have same problem with two MSL library.
Try with maintenance and factory options on panel control, remove and install parts in different positions. With HP LTT too. on this the option "Overrides parameters" ask me for a factory password, but I don´t know why not function the factory password of the front panel.

Anybody know procedures to resolve this problem.

Thanks.