Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL5026 Storageworks Tape Library does not return to first drive

Scott_116
Occasional Contributor

MSL5026 Storageworks Tape Library does not return to first drive

I am using a MSL5026 with 7 tapes loaded for backup each day, yet upon reaching the 7th day it then tries to access the next slot which is empty. How can I make it go back to the first slot once the 7th day is reached? If I set all the other slots to reserved will it only then read the 7 I am using? Or is there some config I can do?