Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL5030 SCSI problem

GNOM
Frequent Advisor

MSL5030 SCSI problem

Hi,

I have a MSL5030 tape Library connected to a HP rp3410 server. Last day during a backup, a SCSII time out event occure. Sincen, the server is not able to recognize the tape Library and the Drive 0. Only Drive 1 is detected on the server. I tried "insf" hp-ux command to reinstall the Library, but It didn't work. I think it's SCSII card problem.

Could someone Help me?
2 REPLIES
Torsten.
Acclaimed Contributor

Re: MSL5030 SCSI problem

Several options:

- power cycle the library
- inspect cables, terminators
- use LTT to analyze
- open a support call

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Curtis Ballard
Honored Contributor

Re: MSL5030 SCSI problem

It sounds like you may be on the right track. You can re-wire the SCSI cables on the library to move the library and drive 0 to the HBA that is currently connected to drive 1 and verify that the library and drive 0 are functioning correctly.