HPE Community
StoreEver Tape Storage
1753959 Members
7615 Online
108811 Solutions
New Discussion

Re: MSL5030

 
Huts
Occasional Advisor

‎10-19-2003 09:38 PM

‎10-19-2003 09:38 PM

MSL5030

Fault Code 200F (SOFT)

Removel prevented

This error is to see on the GUI screen
0 Kudos
Reply
1 REPLY 1
Curtis Ballard
Honored Contributor

‎10-21-2003 05:13 AM

‎10-21-2003 05:13 AM

Re: MSL5030

Software on the host has issued a "Prevent Media Removal" command to one of the drives and a request to unload that drive was received. While media removal is prevented the library is unable to perform the move. The software on the host must first issue an "Allow Media Removal".

Often this is caused by RSM (Removable Storage Manager) running on a Windows system which will automatically claim all tape drives and lock them with a "Prevent Media Removal" command.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.